Lumasense-technologies Pearl OEM Quick Start Guide User Manual download pdf

Pearl Quick Start Guide

Introduction

The Pearl Camera is

a ﬂexible platform to

support a variety of

infrared imaging appli-

cations. The standard

output is NTSC video.

The Pearl Camera prod-

uct is suited for applica-

tions requiring high quality infrared imaging without the

added cost of precision radiometry.

The Pearl Control Software is designed to allow users to

control the Pearl OEM camera or camera core. Users can

adjust video settings, capture images, and use the software

to assist in calibration. Pearl Control software is provided

on a disc in the case and is shipped with the camera.

Pearl OEM Camera

The Pearl OEM Camera is a fully enclosed thermal imag-

ing camera designed to operate with LumaSense

IR detectors with external connectors. The product is also

offered in an optimized midwave conﬁguration for high

temperature and see-through ﬂame applications.

Pearl Camera Core

The Pearl Camera Core includes a three-board electronics

stack with detector mounting assembly, but it does not

have an enclosure. The design is portable among pro-

grammable hardware manufacturers and can be inte-

grated into new or existing designs.

Unpacking and Inspection

When unpacking and inspecting your system compo-

nents, complete the following:

1. Upon receipt, inspect the containers in which the

instruments are packaged prior to opening to ensure

there is no obvious damage that may have occurred

during shipping. If there is reason to suspect that the

contents were damaged in shipping, immediately ﬁle

a claim with the carrier before contacting Luma-

Sense.

2. Open the shipping containers and carefully remove

the instruments and accessories.

3. Check the contents against the enclosed packing list

and inspect for signs of visible damage. If any items

are missing or if there is visible damage to the instru-

ments, contact Customer Care (Santa Clara, CA):

Email: [email protected]

Phone: +1 800 631 0176 or +1 408 727 1600

4. If everything is in order, save the packing material for

possible future use.

Connecting the Cameras

The Pearl cameras have connectors for power, video, and an

RS232 interface. Connections vary based on conﬁguration.

Standard OEM Camera Conguration

Standard Pearl Core Conguration

Standard Conﬁgurations

RS232 connection

Video connection

Power & optional

video connection

Power & video

connection

RS232/Data

connector

1 2 3 4

Summary of Contents

Page 1 - Standard Conﬁgurations

Pearl Quick Start GuideIntroductionThe Pearl Camera is a ﬂexible platform to support a variety of infrared imaging appli-cations. The standard output

Page 2 - Establish Communication with

1. Establish the RS232 ConnectionA three position receptacle is used for the RS232 connec-tions for TXD, RXD, and Ground. The adapter supplied in the

Page 3 - Capture Image

Conﬁguring Video SettingsThe following settings and screenshot (top right) displays some general settings for the video that should display a high qua

Page 4 - Access the Calibrate Tab

Comments to this Manuals

No comments

Lumasense-technologies Pearl OEM Quick Start Guide User Manual

Browse online or download User Manual for Camcorders Lumasense-technologies Pearl OEM Quick Start Guide. LumaSense Technologies Pearl OEM Quick Start Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camcorders Lumasense-technologies Pearl OEM Quick Start Guide